Post-processing
Where it is
Section titled “Where it is”Setup tree: Post-processing
Controls
Section titled “Controls”Results
Section titled “Results”Reload
Section titled “Reload”- Control: action (
ToolButton2)
Viewing results
Section titled “Viewing results”Label changes with the case; the source gives these forms: Viewing results, Show results.
- Control: action (
ToolButton2) - Enabled when:
Results.ready
Pipeline
Section titled “Pipeline”+ Surface
Section titled “+ Surface”- Control: action (
ToolButton2) - Enabled when:
PostState.available
+ Slice
Section titled “+ Slice”- Control: action (
ToolButton2) - Enabled when:
PostState.available
+ Contour
Section titled “+ Contour”- Control: action (
ToolButton2) - Enabled when:
PostState.available
+ Streamlines
Section titled “+ Streamlines”- Control: action (
ToolButton2) - Enabled when:
PostState.available && PostState.vectorFieldName() !== ""
+ Vectors
Section titled “+ Vectors”- Control: action (
ToolButton2) - Enabled when:
PostState.available && PostState.vectorFieldName() !== ""
+ Threshold
Section titled “+ Threshold”- Control: action (
ToolButton2) - Enabled when:
PostState.available
+ Surface flow
Section titled “+ Surface flow”- Control: action (
ToolButton2) - Enabled when:
PostState.available && Results.hasWalls && PostState.vectorFieldName() !== ""
Clear all
Section titled “Clear all”- Control: action (
ToolButton2) - Enabled when:
PostState.items.count > 0
Defaults
Section titled “Defaults”Streamline seeds
Section titled “Streamline seeds”- Control: value (
ValueField) - Bound to:
PostState.defaultSeedCount - Value modes: none (plain entry)
Enough to read the flow, few enough to see the model through them. A few hundred over a seed plane covers the model in a solid curtain; a hundred or so reads as a flow.
Click a point in the view…
Section titled “Click a point in the view…”Label changes with the case; the source gives these forms: Click a point in the view…, Probe a point.
- Control: action (
ToolButton2) - Shown when:
Results.ready
Export probe as CSV
Section titled “Export probe as CSV”- Control: action (
ToolButton2) - Shown when:
PostState.probeHasPoint
Plot over line
Section titled “Plot over line”Hide the line plot
Section titled “Hide the line plot”Label changes with the case; the source gives these forms: Hide the line plot, Sample along a line.
- Control: action (
ToolButton2) - Shown when:
Results.ready
- Control: choice (
ComboRow) - Default: empty
- Bound to:
PostState.lineField - Shown when:
PostState.lineActive
Component
Section titled “Component”- Control: choice (
ComboRow) - Bound to:
PostState.componentOptions - Shown when:
PostState.lineActive && Results.componentCount(PostState.lineField) > 1
From X
Section titled “From X”- Control: value (
ValueField) - Unit: m
- Value modes: none (plain entry)
- Shown when:
PostState.lineActive
From Y
Section titled “From Y”- Control: value (
ValueField) - Unit: m
- Value modes: none (plain entry)
- Shown when:
PostState.lineActive
From Z
Section titled “From Z”- Control: value (
ValueField) - Unit: m
- Value modes: none (plain entry)
- Shown when:
PostState.lineActive
- Control: value (
ValueField) - Unit: m
- Value modes: none (plain entry)
- Shown when:
PostState.lineActive
- Control: value (
ValueField) - Unit: m
- Value modes: none (plain entry)
- Shown when:
PostState.lineActive
- Control: value (
ValueField) - Unit: m
- Value modes: none (plain entry)
- Shown when:
PostState.lineActive
Samples
Section titled “Samples”- Control: value (
ValueField) - Default:
200 - Bound to:
PostState.lineCount - Value modes: none (plain entry)
- Shown when:
PostState.lineActive
Aim at the model
Section titled “Aim at the model”- Control: action (
ToolButton2) - Enabled when:
Results.ready
Export CSV
Section titled “Export CSV”- Control: action (
ToolButton2) - Enabled when:
PostState.lineSamples.length > 0
Report snapshots
Section titled “Report snapshots”Add this view
Section titled “Add this view”- Control: action (
ToolButton2) - Enabled when:
PostState.active && !ReportState.busy
Working…
Section titled “Working…”Label changes with the case; the source gives these forms: Working…, Add standard set.
- Control: action (
ToolButton2) - Enabled when:
PostState.available && !ReportState.busy
Export
Section titled “Export”Save image
Section titled “Save image”- Control: action (
ToolButton2)
Stop (…)
Section titled “Stop (…)”Label changes with the case; the source gives these forms: Stop (…), Save animation.
- Control: action (
ToolButton2) - Enabled when:
Results.times.length > 1
Open in ParaView
Section titled “Open in ParaView”- Control: action (
ToolButton2)
Problems reported against this step
Section titled “Problems reported against this step”The application reports no problems against this step.
… marks a value the application computes at run time, so the source carries no fixed text for it.